G-Code Active Response / Shooter Belts 1.5? / with NEW EDC Buckle
Double layered, laminated, high strength nylon webbing, triple stitched for rigidity and long life. American made and CNC machined from 6061 aluminum. G-Code's EDC Buckle system offers superior strength and holding power. G-Code Active Response / Shooter Belts are an excellent choice for duty, range work or EDC as they provide a high quality support solution for your tactical needs. This belt has NOT been rated or load tested. Available in 1.5" widths. When buying a belt, it is important to select the correct size based upon an accurate measurement. Your belt size is not the same as your pant or waist size; because your belt goes around you and your pants, tucked in shirt, and your underwear. Your belt size is usually 1? or 2? larger than your pant or waist size. G-CODE belts are primarily designed as an outer load bearing belt to carry your holster, magazine carriers, blow-out kit and any other essential items needed. G-CODE belts can also be worn in your belt loops just to hold your pants up. That in mind to get a proper measurement for your belt size using a tape measure, measure around what you will be wearing to determine what size belt you will need in inches. G-CODE Belts are measured by the actual usable length of the belt inside circumference, with a 4? adjustment parameter. Example a Large belt inside minimum circumference is 36? and can be adjusted out to 40?. If your measurement is between 36? and 40? you will need a Large.